Emah's Master BathBelmonte · Master Bath remodel

Master Bath remodel

Pictures of the finished design, the ceiling soffit with its cove LED and every measurement, and a 3D walkthrough of the bath on your phone or PC.

3D walkthrough of the bath The whole house in 3D
About 3 MB the first time; Wi-Fi recommended.
Look and walkDrag to look around; the joystick bottom-left walks.
Tap the dotsRound buttons in the rooms run the lights, shower, sink and doors.
MeasureControls › View › Measure shows each room's dimensions.

The finished bath

Rendered from the 3D model with every light on: downlights, cove LED, niches and the mirror. Tap a picture to see it full size. The plant, towels, stool and mat are only decoration.

Details and plan

Fascia & cove LED

Master Bath ceiling: true ceiling, furred ceiling, a 12 in soffit dropping 7 in on a steel frame and plywood deck, the 2-1/2 in maple board with the cove LED diffuser flush with its top, and the downlights, with their measurements.

Loading the drawing…
Pinch or scroll to zoom · drag to move · double-tap to reset

Heights above the floor

Levelinmm

Cove LED channel · run lengths

Run (centreline)inmm

Downlights

RunFrom the west wallFrom the south wall

Maxxima 2 in anti-glare, 600 lm, 36° beam: 3.16 in trim, 2.5 in cut-out, 2.6 in deep, J-box on a 9.3 in cord. In the soffit 5-7/8 in from the wall (the cut-out clears the steel cheek frame), trim flush at 87-9/16 in above the floor.

Soffit build

12 in wide, 7 in down. 2-1/2 in maple board plus a 4-1/2 in reveal; the LED diffuser is flush with the board top, 4-9/16 in under the ceiling.

PartSizeSpacingFastening

Materials to buy

MaterialBuySizeForNet